ARTITEQ Dibond Plate Hangers (Qty 5)

ARTITEQ Dibond Plate Hangers (Qty 5)

The Dibond Plate Hangers are perfect for hanging pictures and artwork with a flat surface in the back, such as acrylic plates. This hanger is affixed with self-adhesive and holds its weight very well. We also offer spacers that you can apply in the corners of the backside of your art piece. The picture hook is attached directly to the Dibond hanger. The hangers have a thickness of 2.5mm.

These self-adhesive hangers are suitable to help hang a variety of flat panels, including foam boards, photo blocks, glass, mirrors, plexiglass and acrylic frames. They come useful in situations where it’s not possible to use screws on the back of the panel. The unique self-adhesive strips (on the back of the hook) provide good strength up to the maximum capacity shown above. Always clean the panel surface before sticking it on. Before hanging, test the strength of the adhesion by pulling firmly on the panel.

WHAT’S INCLUDED

Dibond Plate Hanger (Qty 5)
Picture Frame Clear Bumpers (Qty 10)

DIMENSIONS

SMALL ROUND
hanger – 42mm (R), 2.5mm (D)
cut-out – 3mm (D), 14mm (W)
capacity – 0.5kg

SMALL SQUARE
hanger – 50mm (H), 52mm (W), 2.5mm (D)
cut-out – 3mm (D), 16mm (W)
capacity – 1kg

MEDIUM SQUARE
hanger – 70mm (H), 70mm (W), 2.5mm (D)
cut-out – 4.5mm (D), 34mm (W)
capacity – 2kg

LARGE SQUARE
hanger – 100mm (H), 100mm (W), 2.5mm (D)
cut-out – 4.5mm (D), 34mm (W)
capacity – 4kg

VERY LARGE RECTANGULAR
hanger – 100mm (H), 200mm (W), 2.5mm (D)
cut-out – 4.5mm (D), 34mm (W)
capacity – 8kg