ARTITEQ Self-Adhesive Back Frame Rails for Dibond & Acrylic Panels (Pack of 2)

ARTITEQ Self-Adhesive Back Frame Rail for Dibond & Acrylic Panels (Pack of 2)

The Artiteq Self-Adhesive Back Frame Rail is a professional mounting profile engineered for attaching Aluminium Dibond, Acrylic, Plexiglas, and Forex panels seamlessly to walls. Pre-fitted with high-tack 3M VHB adhesive tape, this aluminium profile adds structural rigidity to prevent panel warping while creating an elegant, gallery-style floating effect with zero visible fixings. Available in an 8 mm Standard Slim profile and a 15 mm Extra-Rigid profile for larger panel support.

What’s Included in This Set

• ARTITEQ Self-Adhesive Back Frame Rails (Pack of 2)
• Note: Frame corner connectors and wall brackets are sold separately.

Key Features & Benefits

• Pre-Fitted 3M VHB Tape: Heavy-duty industrial adhesive provides a permanent, secure bond to metal, acrylic, glass, and foam boards.
• 3D Floating Shadow Effect: Offsets your print from the wall (8 mm or 15 mm depth) to create a clean, modern drop shadow without showing mounting hardware.
• 6mm Integrated Levelling Adjustment: Built-in levelling system allows up to 6 mm of fine adjustment after hanging to ensure frames are perfectly straight.
• Prevents Panel Warping: Supports flat print boards around their perimeter to maintain structural integrity across large surface areas.

Available Profile Depths

• 8 mm (Standard Slim Profile): Sits 8 mm off the wall. Ideal for smaller to medium panels where a sleek, low-profile shadow gap is preferred.
• 15 mm (Extra-Rigid Anti-Flex Profile): Sits 15 mm off the wall. Provides maximum stiffness for larger panels to prevent board flexing across wider spans.

Sizing & Corner Dimension Guide

Each rail length is cut shorter than the target frame size to account for the corner connectors. Adding 2 corner pieces (sold separately) adds exactly 56 mm total length to each side:

• 344 mm Rail: Creates a 400 mm frame side when combined with 2 corner connectors.
• 444 mm Rail: Creates a 500 mm frame side when combined with 2 corner connectors.
• 544 mm Rail: Creates a 600 mm frame side when combined with 2 corner connectors.
• 644 mm Rail: Creates a 700 mm frame side when combined with 2 corner connectors.
• 744 mm Rail: Creates an 800 mm frame side when combined with 2 corner connectors.

System Requirements & Assembly

• Complete Subframe Setup: A full 4-sided subframe requires 4 rails (2 packs) and one set of Artiteq Frame Corner Connectors.
• Custom Trim Sizing: Aluminium rails can easily be cut down with a hand hacksaw for custom print dimensions.
• Installation Video: Watch the Step-by-Step Back Frame Fitting Guide

Material Compatibility & Maximum Load Specs

• Aluminum Dibond: 3 mm – 6 mm thickness (Up to 4 m² panel area)
• Acrylic / Plexiglas: 3 mm – 5 mm thickness (Up to 4 m² panel area)
• Forex / Foamex: 3 mm – 5 mm thickness (Up to 4 m² panel area)
• Glass: 6 mm thickness (Up to 2 m² panel area)

Technical Documents & Guides

• Step-by-Step Installation Manual (PDF)