METALCITI Phoenix Aluminium Z-Bar French Cleat Hanging Rail, 50mm (2″), Pre-Drilled (2 Holes), 20kg

The Phoenix 50 mm (2″) aluminium French cleat Z-Bar hanging clip is a compact, heavy-duty mounting bracket designed for securing picture frames, small mirrors, cabinets, and panels. Extruded from high-quality aluminium alloy (profile MF625), this pre-drilled 50 mm clip features 2 factory-punched 6 mm fixing holes for fast, hassle-free installation. Ideal for use as individual hanger clips or paired across larger panels, the Phoenix Z-Bar provides a rock-solid, invisible hold with zero visible wall fixings.

Key System Benefits

Compact 20 kg Weight Rating — High-grade extruded aluminium alloy profile supports up to 20 kg per clip when anchored securely into timber wall studs or solid masonry.

Factory Pre-Drilled (2 Holes) — Features 2 pre-punched 6 mm fixing holes spaced across the 50 mm width, eliminating the need to drill through tough aluminium on site.

Ultra-Slim 5 mm Depth Projection — Low-profile interlocking profile holds heavy items almost flush to the wall with just 5 mm total depth projection for a sleek, floating appearance.

Modular & Mix-and-Match Compatible — Interlocks seamlessly across all rail lengths in the Metalciti Phoenix Series, allowing you to pair a 50 mm clip segment with longer wall rails or vice versa.

Technical Specifications & Downloads

Profile Code: Phoenix MF625
Rail Length: 50 mm (2″ — compact cleat hanger clip)
Height × Depth: 47 mm (H) × 5 mm (D)
Interlock Clearance: 16 mm vertical lift clearance required
Maximum Weight Capacity: 20 kg (Subject to wall substrate and anchor rating)
Profile Hole Type: Pre-Drilled (2 × 6 mm fixing holes)
Series Compatibility: Interlocks with all Metalciti Phoenix Series Z-Bar cleat configurations
Technical Drawings: PDF Drawing | DWG CAD File
Installation Manual: Download Z-Bar Hanger Instructions (PDF)

Modular Z-Bar Interlocking System Guide

The Phoenix Z-Bar system is engineered with a fully modular design. Because the interlocking cleat profile remains consistent across the entire Metalciti Phoenix range, a longer rail mounted horizontally to the wall can easily support multiple 50 mm clip segments attached to your frame—or vice versa. This lets you purchase exact individual quantities, adjust anchor placement around existing wall studs, and create custom configurations without paying for excess hardware.

Common Installation Configurations:

Standard Continuous Fit: One 2000 mm rail on the wall paired with one 2000 mm rail on the item.
Split Anchor Fit: One 2000 mm rail on the wall paired with two 600 mm rails across the back of the item.
Custom Offset Fit: One 2000 mm rail on the wall paired with multiple 50 mm or 300 mm rails on the item.

Installation & Structural Load Safety

1. Offer the pre-drilled 50 mm clip up to your wall or frame level, marking your fixing positions through the 2 factory 6 mm holes.
2. Fasten one Z-Bar clip to the wall pointing upward and outward using suitable wall plugs or timber stud screws.
3. Fasten the matching Z-Bar clip to the rear top edge of your frame pointing downward and inward.
4. Lower the item onto the wall rail until the cleats interlock firmly. Ensure you have at least 16 mm vertical clearance above the frame to slide the cleats together.

Load Capacity Safety Note: The stated 20 kg weight capacity refers to the structural strength of the aluminium Z-Bar clip itself. In heavy-duty applications, wall fixings or plasterboard construction will typically fail before the aluminium profile. Always ensure your wall structure and anchor fixings are rated to support the total load.

What’s Included in the Box

1 × Phoenix Aluminium Z-Bar French Cleat Rail 50 mm (Pre-Drilled with 2 × 6 mm Holes – 20 kg Rating)

Note: Rails and clips are sold individually (not in pairs) to allow custom length combinations. Fixing screws and wall plugs are sold separately.

Illustration

Here are example images how the system can be used. Look above what’s included.