METALCITI Phoenix Aluminium Z Bar French Cleat Hanging Rail, 2000 mm (79″), Un-Drilled (No Holes), 160 kg

The Phoenix Heavy-Duty Aluminium Z Bar French Cleat Rail is an ultra-strong, flush-mounting picture hanging system engineered to suspend heavy mirrors, oversized framed artwork, headboards, wall cabinets, and acoustic panels. Manufactured from high-grade extruded aluminium, this low-profile interlocking cleat profile provides a massive 160 kg load capacity per pair—delivering a hidden, level, and rock-solid wall mounting solution for demanding residential and commercial installations.

Why Choose the Phoenix Aluminium Z Bar System?

• Ultra-Heavy 160 kg Load Capacity: Engineered from high-tensile extruded aluminium to support heavy wall features, timber cabinets, TVs, and large mirrors safely.
• Slim 6 mm Stand-Off Profile: Sits exceptionally close to the wall with a minimal 5 mm depth (projection) and a 16 mm lift-off interlock for a near-flush floating finish.
• Un-Drilled Customisation: Supplied as an un-drilled 2000 mm bar, allowing you to drill custom mounting holes precisely where your timber wall studs or plasterboard fixings align.
• Modular Mix & Match Profile: Pair full 2000 mm rails together or cut pieces down with a hacksaw to pair shorter frame cleats with longer wall bars.
• Hidden Security Mount: The interlocking Z-profile conceals all mounting screws entirely behind the frame or panel for a clean, tamper-proof finish.

Technical Specifications

• Profile Model: Phoenix MF625 Architectural Z-Bar.
• Rail Length: 2000 mm (2 Metres / 79 in — easily cut to size).
• Maximum Weight Capacity: Rated up to 160 kg per matched pair (when anchored into solid studs/masonry).
• Profile Height: 47 mm.
• Profile Depth (Projection): 5 mm wall stand-off.
• Lift-Off Clearance (Interlock): 16 mm required above the rail to drop and engage.
• Material & Finish: High-grade mill-finish extruded aluminium.
• Fixing Holes: Un-drilled (allows custom hole positioning on site).

Installation – please read

You can use two rails of the same length to get a perfectly balanced and uniform hold for a standard item. Alternatively, you can use two or more rails of different lengths to securely fit and balance unusual or custom-sized items. This flexible approach makes it easy to secure frames, mirrors, or panels of any size. Rails are offered as singles.

Mix and Match Modular Rail

The Phoenix Z-Bar system is fully modular, so you can pair different rail lengths to suit any hanging project. Because the interlocking cleat profile remains consistent across the entire range, a longer rail mounted to the wall can easily support a shorter rail attached to your frame—or vice versa. This flexibility lets you buy exact quantities, adjust anchor placement around existing wall studs, and create custom configurations without paying for excess hardware.

Examples

These are just examples of how you could combine the lengths; they are not a list of what you will receive. You can mix and match rails of different lengths as you like, such as one 600 mm rail on the wall and three 50 mm rails on the item, or a 900 mm rail on the wall with a 900 mm rail on the item, or a 1200 mm rail on the wall and two 300 mm rails on the item. The only requirement is that all pieces must be the same profile (e.g., Phoenix).

Maximum capacity

Weight ratings apply strictly to the structural limit of the aluminium rails. In practice, wall anchors and fixings (screws, wall plugs, masonry anchors) almost always fail before the rail itself. Always ensure your chosen fixings and wall structure are rated to support the total weight of your item.

How to Install the Phoenix Z Bar Cleat

1. Measure & Cut (Optional): If required, trim the 2000 mm aluminium rail using a fine-toothed hacksaw or miter saw to match your frame width.
2. Drill Mounting Holes: Measure your wall stud centers or frame mounting points, and drill clearance holes through the aluminium rail using a standard metal drill bit.
3. Fix Wall Rail: Mount the first rail to your wall using appropriate screws and plugs, ensuring the open Z-channel faces UP towards the ceiling and is perfectly level.
4. Fix Item Rail: Secure the second rail to the back top edge of your picture frame, mirror, or cabinet with the open Z-channel facing DOWN.
5. Interlock & Hang: Lift your item slightly above the wall rail and lower it into place so the two Z-profiles interlock firmly.

What’s Included

• 1 × Phoenix Aluminium Z Bar French Cleat Hanging Rail (2000 mm Length, Un-Drilled)

Note: This listing is for 1 single 2000 mm rail. Order 2 rails to create a complete interlocking pair, or pair with other Phoenix cleat lengths. Fixings and screws are sold separately.