The METALCITI Las Vegas Z-Bar French Cleat Hanging Rail (Profile STR050) is an architectural-grade, heavy-duty interlocking mounting rail engineered for full-span wall installations of monumental mirrors, oversized artwork, acoustic wall panels, signage, and commercial cabinetry. Extruded from high-tensile structural aluminium and rated to support up to 270 kg (595 lbs), this 2000 mm (200 cm / 79″) cleat creates a slim 12.8 mm shadow projection between the wall surface and the mounted item. Supplied completely un-drilled (no holes) for maximum installation versatility, it allows trade installers, shopfitters, and gallery technicians to drill fixing points directly into exact wall stud centres or solid masonry substrates.
Key System Benefits
Monumental 270 kg Load Rating — Full-span 2000 mm structural aluminium extrusion safely carries heavy architectural panels, oversized framed mirrors, and commercial wall fixtures up to 270 kg (595 lbs) when properly anchored.
Ultra-Slim 12.8 mm Wall Projection — Low-profile interlocking geometry holds items tight and flush against the wall with just 12.8 mm clearance, preventing forward lean or unsightly wall gaps.
Secure 11.2 mm Lift-Off Interlock — Generous 11.2 mm vertical engagement lip ensures a positive mechanical lock that prevents accidental dislodgement from knocks or vibration while allowing straightforward lift-off removal.
Un-Drilled (No Holes) for Exact Stud Alignment — Supplied without pre-drilled holes so you can position and countersink fasteners precisely over timber stud centres, metal framing, or masonry anchors.
Mix-and-Match Modular System — Sold individually so you can pair two full-length 2000 mm rails together, or combine a 2000 mm wall rail with multiple shorter Las Vegas STR050 cleats on the rear of your item.
Technical Specifications & Downloads
Brand & Profile: METALCITI Las Vegas Z-Bar (Profile STR050)
Rail Length: 2000 mm (200 cm / 2 Metres / 79″ — can be cut to custom length)
Profile Height: 38 mm
Wall Projection (Depth): 12.8 mm (approx. 13 mm)
Interlock Lift-Off Engagement: 11.2 mm (approx. 11 mm)
Maximum Weight Capacity: 270 kg (595 lbs) (Rail structural rating; subject to wall substrate and fixings)
Material: High-tensile extruded architectural aluminium
Mounting Holes: None (un-drilled — ready for custom drilling on-site)
Technical Drawing: Download METALCITI Las Vegas STR050 Technical Drawing (PDF)
Mix-and-Match Modular Configurations
Because the interlocking Z-bar profile remains identical across the entire METALCITI Las Vegas STR050 range, rails are sold individually rather than in fixed pairs. This lets you combine different lengths to match exact stud spacing and frame dimensions without paying for excess hardware:
- Standard Continuous Fit: Pair one 2000 mm rail on the wall with one matching 2000 mm rail on the back of the item for maximum continuous weight distribution.
- Split-Cleat Anchor Fit: Mount one 2000 mm (or 1200 mm) rail across your wall studs, and attach two or three 300 mm Las Vegas rails spaced evenly across the rear stiles of your frame or panel.
- Custom Offset Fit: Combine a 900 mm or 2000 mm wall track with multiple 50 mm or 300 mm cleats to navigate around recessed wiring, frame crossbars, or uneven wall obstructions.
How to Install & Use Z-Bar French Cleats
- Mark and drill countersunk mounting holes through your 2000 mm rail to align directly with your timber wall studs, masonry anchors, or frame stiles.
- Fix the wall cleat securely to the wall using a spirit or laser level to guarantee dead-level alignment, ensuring the angled lip faces upward and away from the wall.
- Attach the mating cleat section (or shorter Las Vegas cleats) to the rear of your mirror, panel, or frame with the angled lip facing downward.
- Lift the item slightly above the wall cleat (allowing 11.2 mm lift-off clearance) and lower it straight down until both Z-bar profiles interlock firmly.
Load & Fixing Safety Note: The 270 kg rating refers to the maximum structural capacity of the aluminium extrusion itself, not the wall substrate or screws. In heavy-duty installations, undersized screws or weak wall plugs will fail before the aluminium rail. Always use structural fasteners matched to your wall type (solid brick, concrete, timber studs, or heavy-duty hollow-wall anchors) and verify the wall can carry the total load.
What’s Included in the Box
1 × METALCITI Las Vegas Z-Bar French Cleat Hanging Rail 2000 mm (79″) – No Holes (270 kg Rating)
Note: Sold as a single rail length (Qty 1). Order two 2000 mm rails—or pair with shorter Las Vegas STR050 cleats—to form a complete interlocking wall-and-frame mounting set. Screws and wall plugs are sold separately.












