The METALCITI Las Vegas Z-Bar French Cleat Hanging Rail (Profile STR050) in a compact 50 mm (5 cm / 2″) length is a heavy-duty interlocking mounting clip engineered for flush, secure wall installations. Extruded from high-tensile structural aluminium and rated to support up to 35 kg (77 lbs), this precision cleat creates a slim 12.8 mm projection between the wall surface and the mounted item. Supplied completely un-drilled (no holes) for maximum fixing versatility, it allows framers, cabinetmakers, and commercial installers to drill and countersink anchor points at exact stud, masonry, or narrow frame stile positions—making it ideal for small mirrors, signage, and split-cleat setups where multiple compact clips interlock onto a longer wall-mounted Las Vegas rail.
Key System Benefits
Strong 35 kg Load Rating — Compact 50 mm structural aluminium extrusion safely supports framed artwork, mirrors, plaques, and display panels up to 35 kg (77 lbs) when properly anchored.
Un-Drilled (No Holes) for Custom Fixing Placement — Supplied without pre-drilled holes so you can position and countersink fasteners precisely where needed to align with narrow frame timber, stud centres, or masonry anchors.
Ultra-Slim 12.8 mm Wall Projection — Low-profile interlocking geometry holds items tight and flush against the wall with just 12.8 mm clearance, eliminating forward tilt or unsightly gaps.
Secure 11.2 mm Lift-Off Interlock — Generous 11.2 mm vertical engagement lip ensures a positive mechanical lock that resists accidental dislodgement from knocks or vibration while allowing straightforward lift-off removal.
Modular Interlocking Compatibility — Sold individually so you can pair two 50 mm cleats together, or mount multiple 50 mm clips across the rear of a wide frame to lock onto a single long Las Vegas STR050 wall rail.
Technical Specifications & Downloads
Brand & Profile: METALCITI Las Vegas Z-Bar (Profile STR050)
Rail Length: 50 mm (5 cm / 2″)
Profile Height: 38 mm
Wall Projection (Depth): 12.8 mm (approx. 13 mm)
Interlock Lift-Off Engagement: 11.2 mm (approx. 11 mm)
Maximum Weight Capacity: 35 kg (77 lbs) (Rail structural rating; subject to wall substrate and fixings)
Material: High-tensile extruded architectural aluminium
Mounting Holes: None (un-drilled — ready for custom drilling on-site)
Unit Weight: 25 g
Technical Drawing: Download METALCITI Las Vegas STR050 Technical Drawing (PDF)
How to Install & Use Z-Bar French Cleats
- Note on Pairing: A complete French cleat installation requires two interlocking sections—one fixed to the wall (lip facing upward) and a matching section fixed to the rear of your item (lip facing downward).
- Mark and drill countersunk mounting holes through your 50 mm cleat to align with your wall studs, masonry anchors, or narrow frame stiles.
- Fix the wall cleat securely to the wall using a spirit level to ensure dead-level alignment, keeping the angled lip pointing up and away from the wall.
- Attach the mating 50 mm cleat (or multiple 50 mm clips spaced across wider frames) to the rear of your mirror, panel, or frame with the angled lip pointing downward.
- Lift the item slightly above the wall cleat (allowing 11.2 mm lift-off clearance) and lower it straight down until both Z-bar profiles interlock firmly.
Load & Fixing Safety Note: The 35 kg rating represents the maximum structural capacity of the aluminium cleat itself, not the wall substrate or screws. In almost all installations, wall plugs or undersized screws will fail before the aluminium profile. Always use suitable fixings matched to your wall type (brick, concrete, timber stud, or plasterboard) and verify the substrate can safely carry the full weight of your display.
What’s Included in the Box
1 × METALCITI Las Vegas Z-Bar French Cleat Hanging Rail 50 mm – No Holes (35 kg Rating)
Note: Sold as a single cleat unit (Qty 1). Order two 50 mm cleats—or pair multiple 50 mm clips with a longer Las Vegas STR050 wall rail (such as the 200 mm, 300 mm, 500 mm, 600 mm, 800 mm, 900 mm, 1200 mm, or 2000 mm rails)—to form a complete interlocking set. Screws and wall plugs are sold separately.












