The METALCITI Las Vegas Z-Bar French Cleat Hanging Rail (Profile STR050) in a 200 mm (20 cm / 7.9″) length is an architectural-grade, heavy-duty interlocking mounting bracket engineered for flush, secure wall installations. Extruded from high-tensile structural aluminium and rated to support up to 42 kg (92 lbs), this compact cleat creates a slim 12.8 mm shadow projection between the wall surface and the mounted item. Supplied completely un-drilled (no holes) for maximum installation versatility, it allows framers, cabinetmakers, and gallery technicians to drill anchor points at exact stud, masonry, or frame positions for mirrors, framed artwork, acoustic panels, and wall cabinetry.
Key System Benefits
Heavy-Duty 42 kg Load Capacity — Precision-extruded structural aluminium profile safely supports substantial framed mirrors, heavy hardwood artwork, signage, and wall panels up to 42 kg (92 lbs) when properly anchored.
Ultra-Slim 12.8 mm Wall Projection — Low-profile interlocking geometry holds panels tight and flush against the wall with just 12.8 mm clearance, eliminating unsightly gaps or forward tilt.
Secure 11.2 mm Lift-Off Interlock — Generous 11.2 mm vertical engagement lip ensures a positive mechanical lock that prevents accidental dislodgement from knocks or vibration while allowing straightforward lift-off removal.
Un-Drilled (No Holes) for Custom Fixing Placement — Supplied without pre-drilled holes so you can position and countersink fasteners precisely where needed to align with timber wall studs, masonry anchors, or narrow frame stiles.
Modular Interlocking Compatibility — Supplied as a single 200 mm rail section that mates seamlessly with any matching METALCITI Las Vegas STR050 rail length for continuous wall-to-wall runs or split-cleat mounting.
Technical Specifications & Downloads
Brand & Profile: METALCITI Las Vegas Z-Bar (Profile STR050)
Rail Length: 200 mm (20 cm / 7.9″ — can be trimmed to custom length)
Profile Height: 38 mm
Wall Projection (Depth): 12.8 mm (approx. 13 mm)
Interlock Lift-Off Engagement: 11.2 mm (approx. 11 mm)
Maximum Weight Capacity: 42 kg (92 lbs) (Rail structural rating; subject to wall substrate and fixings)
Material: High-tensile extruded architectural aluminium
Mounting Holes: None (un-drilled — ready for custom drilling on-site)
Unit Weight: Approx. 105 g
Technical Drawing: Download METALCITI Las Vegas STR050 Technical Drawing (PDF)
How to Install & Use Z-Bar French Cleats
- Note on Pairing: A complete French cleat installation requires two interlocking rail sections—one mounted to the wall (lip facing upward) and a matching section mounted to the back of your item (lip facing downward).
- Drill countersunk mounting holes through your 200 mm rail to align with your wall studs, masonry anchors, or frame timber.
- Fix the wall cleat securely to the wall using a spirit level to ensure dead-level alignment, with the angled lip pointing up and away from the wall.
- Attach the mating cleat section to the rear of your mirror, panel, or frame with the angled lip pointing downward.
- Lift the item slightly above the wall cleat (allowing 11.2 mm lift-off clearance) and lower it straight down until both Z-bar profiles interlock firmly.
Load & Fixing Safety Note: The 42 kg rating represents the maximum structural capacity of the aluminium rail itself, not the wall substrate or screws. In almost all installations, wall plugs or undersized screws will fail before the aluminium cleat. Always use heavy-duty fixings matched to your wall type (brick, concrete, timber stud, or plasterboard) and confirm the substrate can safely carry the full weight of your display.
What’s Included in the Box
1 × METALCITI Las Vegas Z-Bar French Cleat Hanging Rail 200 mm – No Holes (42 kg Rating)
Note: Sold as a single rail section (Qty 1). Order two 200 mm rails—or pair with shorter or longer Las Vegas STR050 tracks (such as the 50 mm, 300 mm, 500 mm, 600 mm, 800 mm, 900 mm,










