Dado Rail Camden Hanging Kit (Qty 8)

Dado Rail Camden Hanging Kit (Qty 8)

The Dado Rail Camden Hanging Kit includes eight Moulding Hooks, eight Loop Hanging Wires (150cm), eight Loop Maker Clamps, and one Allen Key.

Designed for Victorian wooden picture rails, dado rails, and partition walls, this kit allows you to create an adjustable second loop at the bottom of the wire—ideal for securing artwork directly without traditional picture hooks.

Each set features durable 2mm perlon wire with a 5cm top loop, capable of supporting up to 20kg per wire. It provides a clean, modern, and flexible way to display art without damaging your walls.

What’s included

Moulding Hook 39mm(H) OR 45mm(H) (Qty 8)
Loop Hanging Wire 150cm 2mm perlon max. 20kg (Qty 8)
Loop Maker Wire Clamp max. 5kg (Qty 8)
Allen Key (Qty 1)

How to use the Loop Maker

Using the Loop Maker clamp to create a custom loop on your hanging wire is a straightforward process requiring only an Allen key.

1) Prepare the Hardware
Tools needed: 2mm Allen key (hex key)
Unscrew the locking bolt inside the Loop Maker clamp slightly using your Allen key to ensure the internal channels are fully clear for threading the wire.

2) Thread the Wire Entry
Compatible with 2mm perlon or steel wire
Pass the loose tail of your hanging wire through the first opening of the metal clamp body, feeding through enough slack length to form your desired loop size.

3) Form the Custom Loop
Attach around frame hardware or directly to hooks
Loop the wire back around your target mounting point (such as a frame D-ring, panel attachment, or bottom hook) and push the tail of the wire back through the second channel of the clamp body.

4) Tighten and Secure
Supports up to 5kg–20kg depending on configuration
Pull the wire tail until the formed loop sits at your exact preferred size and height. Use the Allen key to firmly tighten the locking bolt onto the wires inside the clamp block until fully secured.

Once fully tightened, test the loop by applying manual tension before mounting your artwork onto the dado rail or wall tracking system.