ARTITEQ Click Rail PRO Gallery Hanging Kit 200 cm 50 kg/m

The Click Rail PRO is a heavy duty picture hanging system designed for use with a variety of hooks and wires. Its core functionality lies in its straightforward installation: the rail is mounted to the wall with small clips that are screwed into place, after which the rail simply “clicks” over them. This design provides a clean, professional finish with no visible screws. Once installed, the system allows you to effortlessly add or remove hanging wires anywhere along the rail, offering complete flexibility in the placement of artwork without drilling additional holes in the wall. This adaptability makes it a practical solution for both home and gallery settings.

What’s Included

1 x ARTITEQ Click Rail PRO 200 cm 50 kg/m
2 x End Caps
6 x Installation Brackets
6 x Installation Screws 3.5 mm 40 mm
6 x FISCHER DuoPower Wall Plugs 6 mm
3 x Twister Hanging Wires Perlon 150 cm 25 kg
3 x Ratchet Hooks 15kg

The PRO

ARTITEQ Click Rail PRO Gallery Hanging Kit is available in a two-meter length. ARTITEQ rails are made from durable aluminium and can be cut to size with a hacksaw. End caps protect rail ends. End caps have a small gap in them for connecting wires. It means you can install the rail snugly, wall-to-wall if needed. Please ensure you leave 6mm on each side for the end caps when cutting.

White and grey finishes

ARTITEQ Click Rail PRO Gallery Hanging Kit is available in 2 finishes: pure white and brushed grey. The rail can be cut to size with a metal saw (~2 minutes per rail). The Click Rail PRO supports up to 50 kg per meter. If you fit rails side by side, install one bracket behind where the two rails join. This will align nicely with them on your wall. Other brackets should be fitted every ~40 cm (8 in). The installation involves drilling three holes per rail meter (6 mm drill). No other DIY is required after that.

The white version happily accepts most types of paint so that you can match its colour with your walls. You can also fit it as-is. If you have any questions or need more information about this picture hanging system, please don’t hesitate to contact us.

Corner connector

If you intend to install the Click Rail PRO around corners, you will need to add Corner Connectors (not included in the kit) to your order. They work as an inside and an outside connector. It is hardly visible when used as an inside connector, as it is placed behind the rails. This connector allows you to slide wires around corners without disconnecting them. Available in white, and grey.

Hanging wires

Perlon wires are made of 2mm transparent nylon. They are solid and can support up to 25 kg each. We recommend using two wires per frame if you hang heavier or larger paintings. Perlon wires tend to blend nicely with your wall. As a result, they are hardly visible. If the wire is too long, you can cut it with a sharp knife or coil it behind the frame if you need a longer wire in the future.

Picture hooks

The Ratchet is a self-locking hook. It means it doesn’t have a screw. To reposition it on the wire, you must press its top and bottom between your fingers. On release, it will stay firmly in place. The hook has a 2 mm hole for threading a wire through it. We recommend using two hooks per frame when hanging heavier or larger paintings. You can use several hooks on a single wire up to its maximum capacity of 15 kg.