Swiss Style Frameless Picture Clips 7.5mm (Pack of 10)

Swiss Style Frameless Picture Clips

The Swiss Style Frameless Picture Clips are traditional spring-steel glass clamps designed for creating minimalist, borderless clip frames. This cost-effective framing solution holds a sandwich of glazing, artwork, mount board, and backing panel firmly together without needing an outer picture frame moulding.

What’s Included in This Pack

Swiss Style Frameless Picture Clips 7.5mm (Pack of 10)

Key Specifications

• Rebate Depth Capacity: Up to 7.5 mm (holds glass/acrylic, paper print, mountboard, and backing panel)
• Backing Hole Requirement: 3 mm pre-drilled or punched holes, positioned 27.5 mm from the board edge
• Integrated Hanger: The rear retention ring doubles as a direct wall hanging loop
• Material & Finish: Durable spring steel with a polished silver finish
• Pack Quantity: 10 individual Swiss picture clips
• Primary Application: Borderless clip frames, photo displays, certificate frames, and art exhibitions

Integrated Wall Hanging Loop

These Swiss clips feature a clever dual-purpose design. Inserting the rear ring hanger through your backing board locks the glass-and-art assembly together while providing an integrated hanging loop, letting your framed piece mount flat against wall hooks without extra cord or D-rings.

Low-Cost, High-Volume Framing Solution

Swiss clips are a favourite choice for photographers, school displays, and high-volume contract framers. They deliver a clean, modern aesthetic that keeps the focus entirely on your artwork while remaining fast to assemble and swap out.

Assembly & Framing Tips

1. Prep the Backing Board: Punch or drill 3mm holes in your backing board, positioned precisely 27.5mm from the outer edges.
2. Glass Safety: Ensure all sharp glass edges are smoothed down (using a diamond abrasive pad or fine sandpaper), or use clear acrylic glazing.
3. Protect the Artwork: Insert the Ring & Clip Hanger through the hole from the back and flatten the clip tab. Apply a small square of protective tape over the flattened metal tab on the front face of the board to prevent it from marking paper artwork or mounts.
4. Assemble: Secure the clip edges around your glass and backing board sandwich.