Self-Adhesive Aluminium & Acrylic Panel Hanger (1kg – 8kg)

Our professional-grade Self-Adhesive Dibond Hangers provide a clean, invisible hanging solution for flat-backed artwork, acrylic prints, glass panels, foam boards, and mirrors. Pre-fitted with high-tack industrial adhesive, these heavy-duty steel backing plates attach directly to the rear of your non-porous panels—delivering a borderless, floating gallery display with zero drilling and zero front-facing hardware.

Why Choose Self-Adhesive Dibond Hangers?

• Invisible Floating Gallery Finish: Mounts completely behind your artwork to create a clean, borderless display that stands off the wall.
• Zero Drilling Required: The ideal mounting solution for delicate or rigid materials such as glass, acrylic, plexiglass, and aluminium Dibond where rear screwing is impossible.
• Industrial-Grade Adhesive: Pre-applied high-tack adhesive backing bonds firmly to smooth, non-porous surfaces for reliable, long-term support.
• Complete Wall Buffering: Supplied with 2 clear self-adhesive bumpers to ensure your panel hangs parallel to the wall while protecting paintwork from scratches.
• Multi-Size Versatility: Available in 4 load-tested sizes to support everything from lightweight photo blocks up to heavy 8 kg mirrors.

Key Specifications & Size Capacity

• 45 mm × 45 mm Hanger: Supports up to 1 kg (ideal for small photo blocks, lightweight foam boards, and mini signs).
• 70 mm × 70 mm Hanger: Supports up to 2 kg (ideal for medium acrylic prints, small glass panels, and Dibond art).
• 100 mm × 100 mm Hanger: Supports up to 4 kg (ideal for large photo panels, medium wall mirrors, and plexiglass prints).
• 100 mm × 200 mm Hanger: Supports up to 8 kg (ideal for heavy aluminium Dibond, large glass prints, and oversized wall mirrors).
• Material: Heavy-duty zinc-plated steel plate with industrial pressure-sensitive adhesive layer.

How to Install for Maximum Bond Strength

1. Degrease Surface: Clean the back of your panel thoroughly with an alcohol or isopropyl wipe to remove dust and oil, then allow it to dry completely.
2. Apply Hanger: Peel off the protective backing paper, align the hanger, and press it firmly onto the degreased surface for 30 seconds.
3. Cure for 24 Hours: Apply a flat weight over the hanger and leave it to cure at room temperature for 24 hours before hanging to ensure full adhesive bond strength.
4. Attach Wall Bumpers: Stick the 2 included clear bumpers to the bottom rear corners of your panel to keep it level against the wall.

What’s Included

• 1 × Self-Adhesive Dibond Steel Hanger Plate (Select Size: 1 kg, 2 kg, 4 kg, or 8 kg)
• 2 × Clear Protective Self-Adhesive Wall Bumpers