ARTITEQ Twister Hanging Wire 1mm steel max. 10kg

ARTITEQ Twister Hanging Wire 1mm steel max. 10kg (Qty 1)

The ARTITEQ Twister Hanging Wire is a simple, flexible way to hang your pictures from a picture rail system.

It works using a Twister fitting at the top of the wire. To install, you push this fitting into the rail’s channel, and then turn it 90 degrees. This easy twist securely locks the wire anywhere along the rail’s length, meaning you don’t have to start or stop the wire at the rail’s end.

The wire hangs down, ready for your art. You attach your picture frame (which should have its own D-rings or eyelets) to the wire, usually with an adjustable hook that slides up and down (the hook is sold separately).

You can choose the wire in common lengths: 150cm, 200cm, or 300cm. If you have extra wire hanging below your picture, you can either cut the excess off or neatly coil it up and hide it behind the frame. This whole system makes it quick and easy to change and rearrange your wall display without ever putting another hole in your wall.

What’s included

ARTITEQ Twister Hanging Wire 1mm steel max. 10kg (Qty 1)
> use with 1mm-1.2mm hooks only

Illustration

Please note that the images show how the wire is typically used, but the hooks and rails are not included with the wire itself.