ARTITEQ Picture Hanging Wall Set with Neo Clip and Mini Hook 10 kg (23 lbs)

The ARTITEQ Neo Picture Wall Hanger Clip Set offers a compact, low-profile single-point hanging solution for spaces where installing a full picture rail track is impractical. Engineered for hanging individual frames, artwork, or photographic displays without a horizontal rail, this complete starter set includes a wall clip with a sleek white cover cap, a 150 cm Twister perlon wire, and a compact 4 kg Mini Hook. Measuring just 14 mm × 23 mm, the cylindrical white cap snaps cleanly over the mounting screw for a flush, discreet wall finish.

Why Choose the Neo Picture Wall Hanger Clip Set?

• Complete Out-of-the-Box Set: Supplied with the Neo wall clip, white cover cap, fixing screw, wall plug, 150 cm transparent perlon wire, and Mini Hook for instant installation.
• Compact & Discreet Design: The tiny 14 mm × 23 mm white cover cap conceals the mounting screw completely, blending seamlessly against white walls and light interiors.
• Single-Point Picture Hanging: Perfect for narrow alcoves, small feature walls, or individual frame displays where continuous rails aren’t required.
• Zero Wall Damage for Future Swaps: Once installed, adjust frame height or swap artwork as often as you like without drilling new holes or hammering nails.
• Universal Wire Compatibility: Works with standard 1 mm and 2 mm ARTITEQ Twister perlon wires and stainless steel cables.

Technical Specifications

• System Weight Capacity: Supports up to 4 kg (9 lbs) per wall clip set (limited by the Mini Hook capacity).
• Wall Clip Dimensions: 14 mm × 23 mm low-profile cylindrical fitting.
• Cover Cap Finish: Smooth white plastic snap-on cover cap.
• Perlon Wire Rating: 2 mm transparent Twister perlon wire (150 cm length) rated to 25 kg.
• Mini Hook Rating: Compact screw-locking hook rated to 4 kg.
• Installation Type: Single screw fixing into masonry, solid timber, or plasterboard walls.

How to Install the Neo Hanger Set

Begin by marking your desired position on the wall. Drill a 6 mm hole, insert the supplied wall plug, and screw the internal metal clip securely to the wall. Position the top fitting of the included 2 mm Twister perlon wire inside the clip, then snap the white cover cap over the base hardware until flush. Slide the Mini Hook onto the wire from the bottom, attach your frame, and tighten the hook’s side screw at the desired height.

What’s Included

• 1 × ARTITEQ Neo Picture Wall Hanger Clip (White Cover Cap)
• 1 × Twister Hanging Perlon Wire 150 cm (25 kg Capacity)
• 1 × Mini Hook (4 kg Capacity)
• 1 × Installation Screw (3.5 mm × 40 mm)
• 1 × FISCHER DuoPower Wall Plug (6 mm)