The METALCITI Boston Z-Bar French Cleat Hanging Rail (Profile MF375) in a 700 mm (70 cm / 27.6″) length is an ultra-slim, architectural-grade interlocking mounting rail engineered for flush, secure wall installations. Extruded from high-tensile structural aluminium and rated to support up to 80 kg (176 lbs), this mid-span cleat creates a razor-thin 6 mm shadow projection between the wall surface and the mounted item. Supplied completely un-drilled (no holes) for maximum installation versatility, it allows framers, cabinetmakers, and commercial installers to drill fixing points at exact stud centres, masonry substrates, or frame stiles for heavy picture frames, oversized mirrors, TVs, wall cabinets, and feature panels.
Key System Benefits
Ultra-Slim 6 mm Flush Wall Projection — Low-profile interlocking geometry holds frames, mirrors, and wall panels virtually flush against the wall with just 6 mm clearance, eliminating unsightly gaps or forward tilt.
Heavy-Duty 80 kg Load Capacity — Precision-extruded 700 mm structural aluminium profile safely supports substantial framed artwork, heavy mirrors, cabinetry, and commercial displays up to 80 kg (176 lbs) when properly anchored.
Secure 9 mm Lift-Off Interlock — Positive 9 mm vertical engagement lip ensures a reliable mechanical lock that prevents sagging, twisting, or accidental dislodgement while allowing straightforward lift-off removal.
Un-Drilled (No Holes) for Custom Fixing Placement — Supplied without pre-drilled holes so you can position and countersink fasteners precisely where required to align with timber wall studs, masonry anchors, or wide frame stiles.
Modular Mix-and-Match Compatibility — Supplied as a single 700 mm rail section that mates seamlessly with any matching METALCITI Boston MF375 rail length for continuous wall-to-wall runs or split-cleat mounting.
Technical Specifications & Downloads
Brand & Profile: METALCITI Boston Z-Bar (Profile MF375)
Rail Length: 700 mm (70 cm / 27.6″ — can be trimmed to custom length)
Profile Height: 35 mm
Wall Projection (Depth): 6 mm (wall-to-frame gap)
Interlock Lift-Off Clearance: 9 mm vertical engagement
Overall Dimensions: 700 mm (W) × 35 mm (H) × 6 mm (D)
Maximum Weight Capacity: 80 kg (176 lbs) (Rail structural rating; subject to wall substrate and fixings)
Material: High-tensile extruded architectural aluminium
Mounting Holes: None (un-drilled — ready for custom drilling on-site)
Technical Specification PDF: Download METALCITI Boston MF375 Specification (PDF)
Mix-and-Match Modular Configurations
Because the interlocking Z-bar profile remains identical across the entire METALCITI Boston MF375 range, rails are sold individually rather than in fixed pairs. This lets you combine different lengths to match exact stud spacing and frame dimensions without paying for excess hardware:
- Standard Continuous Fit: Pair one 700 mm rail on the wall with one matching 700 mm rail on the back of your mirror, frame, or cabinet.
- Split-Cleat Anchor Fit: Mount one 700 mm rail across your wall studs, and attach two or three 50 mm Boston cleats (or 300 mm Boston rails) spaced evenly across the rear stiles of your item.
- Custom Multi-Span Fit: Combine alongside other Boston MF375 lengths—such as 600 mm, 900 mm, or 1200 mm rails—to span wide architectural panels and commercial installations.
How to Install & Use Z-Bar French Cleats
- Note on Pairing: A complete French cleat installation requires two interlocking sections—one fixed to the wall (lip facing upward) and a matching section fixed to the rear of your item (lip facing downward).
- Mark and drill countersunk mounting holes through your 700 mm rail to align directly with your timber wall studs, masonry anchors, or frame stiles.
- Secure the wall cleat to your plasterboard, timber stud, or masonry wall with a spirit level to ensure dead-level alignment, keeping the angled lip pointing up and away from the wall.
- Attach the mating cleat section (or shorter Boston cleats) to the rear of your mirror, picture frame, TV bracket, or cabinet with the angled lip pointing downward.
- Lift the item slightly above the wall cleat (allowing 9 mm lift-off clearance) and lower it straight down until both Z-bar profiles interlock firmly.
Load & Fixing Safety Note: The 80 kg rating refers strictly to the maximum structural capacity of the aluminium rail itself, not the wall substrate or screws. In almost all installations, wall plugs or undersized screws will fail before the aluminium cleat. Always use heavy-duty fixings matched to your wall type (brick, concrete, timber stud, or plasterboard) and confirm the substrate can safely carry the full weight of your display.
What’s Included in the Box
1 × METALCITI Boston Z-Bar French Cleat Hanging Rail 700 mm – No Holes (80 kg Rating)
Note: Sold as a single rail section (Qty 1). Order two 700 mm rails—or pair with shorter or longer Boston MF375 tracks—to form a complete interlocking wall-and-frame mounting set. Screws and wall plugs are sold separately.







