ARTITEQ Click Rail PRO Gallery Hanging Kit 200 cm 50 kg/m (110 lbs/m)

The ARTITEQ Click Rail PRO is a heavy-duty, professional-grade picture hanging system designed for seamless, damage-free artwork displays in gallery, commercial, and residential settings. Engineered with a heavy-load capacity of 50 kg/m, the rail snaps firmly over concealed mounting clips for a sleek finish with zero visible screws. Once installed, transparent twister wires can be clicked into the track at any point along its length, allowing you to rearrange, level, or swap artwork effortlessly without drilling additional holes in your walls.

Key System Benefits

Heavy-Duty 50 kg/m Load Rating — High-grade extruded aluminium profile supports heavy picture frames, large canvases, and gallery mirrors up to 50 kg per metre.

Invisible Click-On Mounting — Fix the installation brackets to your wall and snap the Click Rail PRO track over them for a clean, screw-free aesthetic.

Paintable Profile Finish — The Pure White finish happily accepts standard indoor wall paints, allowing you to paint the track to match your interior walls or leave it as a crisp white accent (also available in Brushed Grey).

Twister Wire Flexibility — Insert transparent 2 mm Perlon twister wires into the bottom rail slot anywhere along the track—no need to slide them in from the ends.

Wall-to-Wall Installation Friendly — Flush end caps feature a small wire notch, allowing tracks to be fitted snugly wall-to-wall without obstructing hanging cables.

Technical Specifications

Track Length: 200 cm (2 Metres — easily trimmed using a standard metal hacksaw)
Weight Capacity: 50 kg per metre (Heavy-duty gallery rating)
Available Finishes: Pure White (Paintable) & Brushed Grey
Wire Type Included: 2 mm Transparent Perlon Twister Wires (25 kg capacity per wire)
Hook Type Included: Self-Locking Ratchet Hooks (15 kg capacity per hook)
Mounting Interval: 3 installation brackets per metre (every ~40 cm)

Included Accessories & System Guidance

Twister Hanging Wires (Perlon 2 mm)
The included 150 cm Perlon Twister wires are crafted from 2 mm transparent nylon, supporting up to 25 kg per cord. They blend naturally against your wall for a virtually invisible suspension. Excess wire length can be coiled behind the frame for future re-use or trimmed cleanly with a sharp utility knife.

Auto-Locking Ratchet Hooks
The supplied Ratchet Hooks feature a tool-free, self-locking mechanism. Simply squeeze the top and bottom plunger between your fingers to glide the hook along the wire, and release to lock instantly in place (rated to 15 kg per hook). Multiple hooks can be stacked on a single wire for vertical multi-frame displays.

Corner Installation Optional Add-On
If you plan to run your system around room corners, add ARTITEQ Corner Connectors (sold separately) to your order. They function as both inside and outside connectors, allowing you to glide hanging wires around corners without disconnecting them.

How to Install the Click Rail PRO

1. Mark your horizontal wall line using a spirit level at the desired height.
2. Drill 6 mm pilot holes at ~40 cm intervals along your line (always place one bracket directly behind where two rails butt together).
3. Insert the supplied 6 mm FISCHER DuoPower wall plugs and screw the installation brackets firmly to the wall.
4. Snap the Click Rail PRO track over the mounting brackets until it clicks securely into place.
5. Push the end caps onto each open end of the rail, click your twister wires into the track, slide on your ratchet hooks, and hang your artwork.

Cutting Tip: When trimming a 200 cm track to custom wall dimensions using a metal saw, subtract 6 mm on each side to account for the end cap projection.

What’s Included

1 × ARTITEQ Click Rail PRO Track 200 cm (50 kg/m)
2 × End Caps
6 × Installation Brackets
6 × Installation Screws (3.5 mm × 40 mm)
6 × FISCHER DuoPower Wall Plugs (6 mm)
3 × Twister Perlon Hanging Wires (150 cm / 25 kg Rating)
3 × Self-Locking Ratchet Hooks (15 kg Rating)