The METALCITI Boston Z-Bar French Cleat Hanging Rail (Profile MF375) in a compact 50 mm (5 cm / 2″) length is an ultra-slim, architectural-grade interlocking mounting clip engineered for flush wall installations. Extruded from high-tensile structural aluminium and rated to support up to 25 kg (55 lbs), this precision cleat creates an ultra-tight 6 mm shadow projection between the wall surface and the mounted item. Supplied pre-drilled with two 6 mm round fixing holes for rapid installation, it is ideal for picture frames, mirrors, plaques, headboards, and split-cleat setups where multiple compact clips interlock onto a longer wall-mounted Boston MF375 rail.
Key System Benefits
Ultra-Slim 6 mm Flush Wall Projection — Low-profile interlocking geometry holds frames & panels flush against the wall with just 6 mm clearance, eliminating unsightly gaps or forward lean.
Strong 25 kg Load Capacity — Compact 50 mm structural aluminium extrusion safely supports framed artwork, mirrors, signage, and feature panels up to 25 kg (55 lbs) when properly anchored.
Factory Pre-Drilled 2-Hole Design — Supplied ready to mount with two 6 mm round fixing holes, saving workshop preparation time when fixing onto narrow frame timber or wall substrates.
Secure 9 mm Lift-Off Interlock — Positive 9 mm vertical engagement lip prevents sagging, twisting, or accidental dislodgement from knocks while allowing straightforward lift-off removal.
Modular Mix-and-Match Compatibility — Sold individually so you can pair two 50 mm cleats together, or space multiple 50 mm clips across the rear of a wide frame to lock onto a single long Boston MF375 wall rail.
Technical Specifications & Downloads
Brand & Profile: METALCITI Boston Z-Bar (Profile MF375)
Rail Length: 50 mm (5 cm / 2″)
Profile Height: 35 mm
Wall Projection (Depth): 6 mm (wall-to-frame gap)
Interlock Lift-Off Clearance: 9 mm vertical engagement
Overall Dimensions: 50 mm (W) × 35 mm (H) × 6 mm (D)
Maximum Weight Capacity: 25 kg (55 lbs) (Rail structural rating; subject to wall substrate and fixings)
Material: High-tensile extruded architectural aluminium
Mounting Holes: Pre-drilled with 2 × 6 mm round fixing holes
Technical Specification PDF: Download METALCITI Boston MF375 Specification (PDF)
Mix-and-Match Modular Configurations
Because the interlocking Z-bar profile remains identical across the entire METALCITI Boston MF375 range, rails are sold individually rather than in fixed pairs. This lets you combine different lengths to match exact stud spacing and frame dimensions without paying for excess hardware:
- Standard Compact Pair: Pair one 50 mm cleat on the wall with one matching 50 mm cleat on the back of your frame or plaque.
- Split-Cleat Anchor Fit: Mount one 600 mm Boston rail across your wall studs, and attach three 50 mm Boston cleats spaced evenly across the rear stiles of your mirror or panel.
- Continuous Long-Span Fit: Combine longer Boston MF375 rails—such as pairing a 900 mm rail with a matching 900 mm rail, or a 1200 mm rail with two 300 mm rails—for oversized commercial displays and headboards.
How to Install & Use Z-Bar French Cleats
- Note on Pairing: A complete French cleat installation requires two interlocking sections—one fixed to the wall (lip facing upward) and a matching section fixed to the rear of your item (lip facing downward).
- Using the two pre-drilled 6 mm holes, fix the wall cleat securely to your plasterboard, timber stud, or masonry wall with a spirit level to ensure dead-level alignment, keeping the angled lip pointing up and away from the wall.
- Attach the mating 50 mm cleat (or multiple 50 mm clips spaced across wider frames) to the rear of your picture frame, mirror, or panel with the angled lip pointing downward.
- Lift the item slightly above the wall cleat (allowing 9 mm lift-off clearance) and lower it straight down until both Z-bar profiles interlock firmly.
Load & Fixing Safety Note: The 25 kg rating refers strictly to the maximum structural limit of the aluminium cleat itself, not the wall substrate or screws. Always ensure your chosen wall plugs, screws, and wall construction (plasterboard vs. brick, concrete, or timber stud) are rated to safely support the combined weight of your display.
What’s Included in the Box
100 × METALCITI Boston Z-Bar French Cleat Hanging Rail 50 mm (2″) – Pre-Drilled 2 Holes (25 kg Rating)
















