TRACK & SLIDE Twister Hanging Wire T80 2.5 mm Stainless Steel 80 kg

The TRACK & SLIDE Twister Stainless Steel Hanging Wire 2.5 mm is an industrial-strength suspension cable engineered for displaying monumental artwork, heavy mirrors, acoustic panels, and museum exhibitions. Available in lengths of 200 cm, 300 cm, and 500 cm, this 7×7 braided marine-grade stainless steel cable supports up to 80 kg (176 lbs) on a single drop. Featuring a tool-free Twister head, it clicks directly into the rail channel of wall- or ceiling-mounted tracks at any point, enabling rapid display adjustments without disturbing neighbouring artwork.

Key System Benefits

Industrial 80 kg Load Rating — High-tensile 2.5 mm multi-strand stainless steel cable safely suspends heavy artwork and large framed mirrors up to 80 kg (176 lbs) per wire, or up to 160 kg (352 lbs) when used as a balanced pair.

Tool-Free Twister Lock Head — Precision-engineered brass twister head inserts into the track profile and turns 90 degrees to lock securely at any position, eliminating the need to thread cables from the end of the rail.

Three Drop Length Options — Choose from 200 cm (2 m), 300 cm (3 m), or 500 cm (5 m) drops to easily accommodate standard gallery walls, tall domestic ceilings, high-ceiling atriums, and stairwells.

Heavy-Duty Hook Compatibility — Engineered specifically to pair seamlessly with heavy-duty auto-locking and manual picture hooks, including the TRACK & SLIDE Heavy Duty LOCK H70 Hook.

Technical Specifications & Downloads

Product Range: TRACK & SLIDE Heavy Duty System
Cable Material: 7×7 braided marine-grade stainless steel
Cable Diameter: 2.5 mm
Available Drop Lengths: 200 cm (79″), 300 cm (118″), and 500 cm (197″)
Maximum Weight Capacity: 80 kg (176 lbs) per wire (160 kg / 352 lbs when used as a pair)
Top Fitting Type: Click-and-turn Twister anchor head
Track Compatibility: Suitable for wall-mounted and ceiling-mounted TRACK & SLIDE Heavy Duty Tracks
Hook Compatibility: Pairs with 2.5 mm heavy-duty hooks (e.g. LOCK H70 Hook)
System Catalogue: Download TRACK & SLIDE System Catalogue (PDF)

Simple Installation Guide

1. Select your desired horizontal position along your installed TRACK & SLIDE Heavy Duty Track.
2. Push the Twister head vertically upward into the track channel.
3. Turn the head 90 degrees until it locks into the internal lip of the profile.
4. Thread a 2.5 mm heavy-duty picture hook onto the free cable end and slide it to your desired display height.
5. Hang your frame onto the hook, coiling any excess cable neatly behind the frame.

Load Capacity Tip: For framed artwork exceeding 80 kg or panels wider than 1 metre, always hang using two 2.5 mm steel drop wires and two matching hooks to distribute the load evenly up to 160 kg and maintain level alignment.

What’s Included in the Box

1 × TRACK & SLIDE Twister Stainless Steel Hanging Wire 2.5 mm (Select Length: 200 cm, 300 cm, or 500 cm – 80 kg Rating)

Note: Wall and ceiling tracks, picture hooks, and frame brackets are sold separately.